Black Gold Sight need more left

Aid! I need more left windage on my Black Gold sight!

More than Left!!

Are you trying to setup your Blackness Gold sight, and finding that you need more left windage? This is a trouble that is condign more than common with increasing riser widths. Only fear not, well-nigh of the time there is a reason why you need more left windage, and it has more to practice with your residual and bow melody than the sight itself.

Melody Tune

Stride 1. Is this a new bow? If then, make sure your bow is tuned properly! Shoot through paper, is your residuum is tuned correctly? Check out Mark'due south dandy write up on paper tuning your bow here.

Step 2. Walk dorsum tune your bow. Over again we get help from Marking on walk back tuning here.

However demand more left?

Step 3. We're here to help. This is where years and years of experience with Black Golden sights comes in to play. At that place is a clandestine tip that can get you the actress left y'all need without buying an 40 windage bar, and we're going to share it with you!

black gold more left

SHHH!

A lilliputian known aligning baked in to the 1st axis mount allows you to move the sight left on the base. If you remove the top and lesser screws of the football shaped 1st axis adjustment mount y'all'll run across that you tin movement the mount over to the left.

remove 2nd axis mounting screws

Remove the ii inner screws and move the "football" shaped mount over one position.

football in stock position

football mount moved over

Re-attach your 1st centrality mount, re-level your sight to the bow and shoot.

before

Earlier

after

Afterwards

Re-level

This gives Almost archers enough left to comfortably punch in your sight. Keep in mind that you will have to re-level the sight to your bow using your 2nd centrality adjustments. Your sight should look like this:

Black gold moved left

Give us a call

All the same need more left?  We recommend giving Black Gold a phone call to inquire about their XL windage bar. Install is super easy if yous have the non-micro head, pretty involved if you lot have the micro-gang adjust (widowmaker) housing. You'll definitely want to discuss with them your options.  You tin can achieve them at (406) 388-9060.