How To Repair Neoprene Wetsuit

blueseventy wetsuits are crafted from the highest quality of neoprene available. Unfortunately this ways that they are more susceptible to damage than your boilerplate surfing or dive wetsuit. It's adequately easy to accidentally rip the neoprene when getting into and out of the suit. Fingernail nicks are the most common issue and are almost oftentimes seen on the legs and artillery of a wetsuit.

Small-scale fingernail nick in a wetsuit leg.

The next most common are pocket-size tears at the seams of the adapt. These are usually the result of pulling too hard when putting the suit on or past catching or pinching the seam of the wetsuit with your nails. As we brand every endeavour to ensure that our products use the highest quality materials and craftsmanship available, you also should apply the utmost care with your wetsuit to avoid accidental damage. Should a tear or fingernail cut occur, then repairing information technology yourself is a very uncomplicated job.

Always habiliment the white cotton fiber gloves that come with your wetsuit to prevent damage from fingernails while putting your suit on. For further intendance information click here.

In club to repair a tear or nick you volition need neoprene cement glue. We recommend Aquaseal Neo Neoprene Cement. Yous can hands purchase it from us,here. The Aquaseal cement comes in an easy to apply tube that you tin can utilize directly to the damaged area.

For small fingernail nicks or other tiny repairs, a paperclip tin can exist helpful to spread the glue and avoid a mess. If the tear is larger than 0.five-1" y'all may also want a small brush (such as an artists painting brush) or a spatula (which can only be a thin piece of plastic or card).

Follow these steps to repair your wetsuit.

Step 1:
Fold the wetsuit over at the point of the tear then that information technology opens up to reveal the insides of the two surfaces that need to be glued dorsum together.

Step 2:
Apply a thin, even layer of Aquaseal mucilage to both surfaces. If information technology is a nick or tear that does not go completely through the neoprene and liner you tin carefully fill the nick area with gum. Too much glue volition overflow when you press the sides dorsum together, too piffling and you won't get a complete seal. (You tin can ever add additional coats if needed). Continue to concur the cut open while the gum dries (5 minutes). Do not rejoin the surfaces while the mucilage is however wet or tacky.

If repairing a small nick, the tip of the Aquaseal tube may be too broad to become a make clean application of gum. We recommend using a paperclip for small repairs.

Simply squeeze a small drop of mucilage onto the tip of an unfolded paperclip and paint the glue inside the nick.

Stride 3:
Keeping the tear open, allow the glue to dry out for 5 minutes. We've found the easiest way to exercise this is to utilise a clothespin or small clamp so that y'all don't have to stand there holding your wetsuit for five minutes. The glue looks glossy when wet. It will go more matte when dry out. Once information technology appears dry, check it by gently touching the glue surface. When dry out, it volition feel only slightly tacky and will not stick to your finger.

Stride 3a:
The instructions on the Aquaseal mention applying a 2d coat of glue once the get-go has dried for five minutes. Apply the 2nd coat in the same manner and permit to dry out for 10 minutes.

Nosotros've found that for smaller nicks this 2d coat isn't always needed. Please use your own judgement on your repair if you need one or ii coats of mucilage. The second coat will probable create a stronger bail.

Step 4:
Flatten out the suit so that the two surfaces come up together. The bond is instant.

Step 5:
Press the ii surfaces firmly together.

And yous're done!  *
The Aquaseal creates a solid bond that volition non pull apart even when the neoprene is stretched out, such as when you lot're putting on your wetsuit.

Notes:

The suit can be used in the water straight away. Notwithstanding, the maximum bond is achieved over a menstruum of 4 to 6 hours. Therefore, you should employ extra caution to avoid putting any firsthand pressure on to the repaired surface if you lot demand to get into your wetsuit immediately.

*If you find you've completed all the steps and the tear is non completely sealed y'all can hands echo the steps, to fill up in the surface area that did not seal. We likewise discover that it can exist useful to use the paperclip to apply a thin seal forth the seam of the repaired tear. Employ a baby wipe or damp paper towel to remove any excess glue from the around the repair site while it's still moisture. Permit the new layer of glue to dry out completely.

Later completing the repair process this tear was not completely sealed. Nosotros squeezed open the remaining bit of tear, added a new layer of glue and let dry.

How To Repair Neoprene Wetsuit,

Source: https://www.blueseventy.com/pages/how-to-repair-your-wetsuit

Posted by: mackforculd.blogspot.com

Share this post